Hooked on Hydronics Blog | Design Engineer Tips (6)

Topic: Design Engineer Tips

Building Owner Tips Design Engineer Tips Energy Savings

Engineering Webinar for PDH Credit on Air Curtain Design and Applications

By Kelly Patterson on June 20, 2017

Air curtains can save energy by keeping conditioned air in the building when the doors are open. But what are best design practices and reasonable...

Products Building Owner Tips Design Engineer Tips

Manufacturer News: Griswold Controls Unimizer Valve

By Kelly Patterson on June 15, 2017

The Griswold Controls Unimizer® Valve is no ordinary valve. According the Griswold literature, it has better than globe valve performance at better...

Building Owner Tips Design Engineer Tips Piping

Metraflex LPD Y-Strainer Is Product of the Year Finalist

By Kelly Patterson on June 7, 2017

If you haven't yet heard of Metraflex's new LPD Y-Strainer, it's probably time for you to get in the know. This incredibly innovative new Y-strainer...

Building Owner Tips Design Engineer Tips Water Purification

Lessons from Flint: Why Water Purification Solutions are Critical in Commercial Building

By Kelly Patterson on May 22, 2017

Most people have heard of the water crisis in Flint, Michigan. But how many of us in the commercial HVAC and plumbing worlds stop to think of the...

General Knowledge Building Owner Tips Design Engineer Tips Green Building Design and Equipment

Green Building: ORC Technology Helps Recover Waste Heat

By Kelly Patterson on May 9, 2017

Efficiency and energy management are hot button topics in the building industry. Not surprisingly, according to a 2013 study from Elsevier, world...

Building Owner Tips Cooling Towers Design Engineer Tips

Legionella Risk Management for Hospitals

By Kelly Patterson on May 2, 2017

There was a terrific article in Healthcare Facilities Today last week about Legionella risk management especially in protective care facilities. It's...

Pumps Training Design Engineer Tips

TACO Webinar: Software Training Webinars with Ra Puriri

By Kelly Patterson on April 19, 2017

HVAC engineers and designers can save dozens of design hours on every job and virtually eliminate errors. You might be asking how? Use Taco's...

Manufacturer Information Design Engineer Tips

HVAC Design: Reinventing the Y-Strainer

By Kelly Patterson on April 4, 2017

Most of us don’t even really think much about Y-strainers when it comes to designing our piping systems. We know where we need them. We know why we...